Minh Dung Aluminum Ltd - Vietnam Aluminum
Minh Dung Aluminum Ltd. was established in 2017 to manufacture and trade aluminum products with Vietnamese brands with international standards to meet the
We are more than an aluminium alloy solution provider.
Do you need consumer aluminium alloy products or learn more info about aluminum alloy prices?
Minh Dung Aluminum Ltd. was established in 2017 to manufacture and trade aluminum products with Vietnamese brands with international standards to meet the
Discover top-quality aluminum products at Rhine Vietnam, the premier manufacturer and supplier of aluminum profiles, fencing, ladders, and more. With expertise in aluminum
Aluminum 3004 is a medium strength aluminum alloy with manganese and magnesium as its primary alloying elements. It has higher strength than 3003 alloy but lower
3004 (AlMn1Mg1, 3.0526, A93004) Aluminum. 3004 aluminum is a 3000-series aluminum alloy: the main alloying addition is manganese, and it is formulated for primary forming
ALUMINUM 3004 is nominally an aluminum-manganese-magnesium alloy which cannot be hardened by heat treatment; however, it can be strain hardened by cold working. It
Aluminum Alloy 3004 O, Aluminum Alloy 3004. About of these are aluminum sheets, are aluminum profiles. A wide variety of aluminum alloy 3004 o options are available to you, such as plate, coil. You can also choose from 5000 series, 6000 series, and 1000 series. As well as from bending, welding, and cutting. And whether aluminum alloy 3004 o is
Aluminum Alloy 3004 (UNS A93004) Aluminum 3004 is a versatile alloy that belongs to the 3000 series of aluminum alloys, which are known for their excellent formability and corrosion resistance. It is commonly used in the manufacturing of beverage cans, as well as in the construction of roofing and siding materials. Chemical Composition.
3004-H38 Aluminum. 3004-H38 aluminum is 3004 aluminum in the H38 temper. This is the strongest temper normally produced through the action of strain hardening followed by stabilization. It is closely related to H18. The graph bars on the material properties cards below compare 3004-H38 aluminum to: 3000-series alloys
Aluminium / Aluminum 3004 alloy is forged at temperatures ranging from 372 to 510°C (700 to 950°F). Hot Working. Aluminium / Aluminum 3004 alloy is hot worked at 260 to 483°C (500 to 900°F). Cold Working. Aluminium / Aluminum 3004 alloy can be cold worked up to 75% reduction of area using conventional techniques. This process should
3004 aluminium alloy is an alloy in the wrought aluminium-manganese family (3000 or 3xxx series). It is similar to the 3003 alloy, except for the addition of approximay 1% magnesium. It can be cold worked (but not, unlike some other types of aluminium alloys, heat treated) to produce tempers with a higher strength, but a lower ductility.
For those looking to source high-quality aluminum materials, Mingtai Aluminum is a trusted manufacturer of aluminum products, including 3004 aluminum alloy for honeycomb panels. With a strong commitment to quality and innovation, Mingtai Aluminum offers a wide range of aluminum solutions that meet industry standards and customer
3004-H34 aluminum is 3004 aluminum in the H34 temper. To achieve this temper, the metal is strain hardened, and then stabilized, to a strength that is roughly halfway between annealed (O) and full-hard (H38). The graph bars on the material properties cards below compare 3004-H34 aluminum to: 3000-series alloys (top), all
3004-H19 aluminum is 3004 aluminum in the H19 temper. To achieve this temper, the metal is strain hardened to a strength that exceeds H18 by at least 10 MPa (or 1.5 ksi). The graph bars on the material properties cards below compare 3004-H19 aluminum to: 3000-series alloys (top), all aluminum alloys (middle), and the entire
3004 Aluminum: The Corrosion Fighter. Lastly, let’s explore the properties of 3004 aluminum, another aluminum-manganese alloy.It is particularly known for its corrosion resistance: Formability: 3004 aluminum shares the excellent formability traits of 3104 and 3003.This makes it suitable for a range of applications where complex shapes
3004 aluminium alloy is an alloy in the wrought aluminium-manganese family (3000 or 3xxx series). It is similar to the 3003 alloy, except for the addition of approximay 1% magnesium. It can be cold worked (but not, unlike some other types of aluminium alloys, heat treated) to produce tempers with a higher strength but a lower
3004-H36 Aluminum. 3004-H36 aluminum is 3004 aluminum in the H36 temper. To achieve this temper, the metal is strain hardened, and then stabilized, to a strength that is roughly 3/4 of the way between annealed (O) and full-hard (H38). The graph bars on the material properties cards below compare 3004-H36 aluminum to: 3000
3004-H14 aluminum is 3004 aluminum in the H14 temper. To achieve this temper, the metal is strain hardened to a strength that is roughly halfway between annealed (O) and full-hard (H18). The graph bars on the material properties cards below compare 3004-H14 aluminum to: 3000-series alloys (top), all aluminum alloys (middle), and the
Abstract. In this investigation, flow behavior of Aluminum 3004 alloy was studied by conducting compression tests over a wide range of temperatures and strain rates. Stress-strain curves were
Among wrought aluminum alloys, the composition of 3104 aluminum is notable for including gallium (Ga) and containing a comparatively high amount of manganese (Mn). Gallium is used to improve corrosion resistance and to modify an alloy\'s response to etching, brightening, and similar treatments. 3004 (AlMn1Mg1, 3.0526,
Vietnam 5052-h32 aluminum coil belongs to Al-Mg alloy, which is widely used. Especially in the construction industry, it is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability and medium
Aluminum Alloy. ALUMINUM ALLOY 3004 GENERAL 3004 is a non- heat treatable aluminum alloy with manganese as its primary alloying element. It is similar to 3003 except for the addition of approximay
About Us Vietnam Yang Sin Industrial Ltd. was established in 2006 and is located in ThaiBinh Province, Vietnam. It is a professional secondary aluminum alloy ingot smelting plant. Its business projects are aluminum alloy ingots and special aluminum ingots. The annual production capacity is nearly 15,000 metric tons and the highest monthly is 2,000
Aluminum, a versatile metal with a wide range of applications, is a popular choice in various industries. When it comes to selecting the right aluminum sheet for your specific needs, understanding the differences between various alloys is crucial. In this article, we will unveil the properties and characteristics of three commonly used
Aluminum 3004-H19. Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN. Composition information provided by the Aluminum Association and is not for design. Hardness, Brinell, 500 kg load with 10 mm ball. Calculated
The evolution of intermetallics in aluminum alloy 3004 from the casting to the thin-sheet stages is examined. Two casting types have been utilized:
3004-H36 aluminum is 3004 aluminum in the H36 temper. To achieve this temper, the metal is strain hardened, and then stabilized, to a strength that is roughly 3/4 of the way between annealed (O) and full-hard (H38). The graph bars on the material properties cards below compare 3004-H36 aluminum to: 3000-series alloys (top), all
3104 (AlMn1Mg1Cu) Aluminum 3104 aluminum is a 3000-series aluminum alloy: the main alloying addition is manganese, and it is formulated for primary forming into wrought products. 3104 is the Aluminum Association (AA)
The most widely used in buildings is the 3000 series “aluminum-manganese alloys of which the 3003, 3004, 3005, 3103 and 3105 alloys are used in large quantities, because the manganese content in the aluminum-manganese alloy is stable. Under the joint action of other metals, the 3000 series aluminum alloy has the appropriate elongation, good
3004-O aluminum is 3004 aluminum in the annealed condition. It has the lowest strength and highest ductility compared to the other variants of 3004 aluminum. The graph bars on the material properties cards below compare 3004-O aluminum to: 3000-series alloys (top), all aluminum alloys (middle), and the entire database
3004 aluminium alloy is an alloy in the wrought aluminium-manganese family (3000 or 3xxx series). It is similar to the 3003 alloy, except for the addition of approximay 1%